Hobby Tool
|
Hobby Tool Index
Here are a few popular hobby tools. See our full selection by clicking on the links above.
|
|
Mini Ratcheting Bar Clamp
Item: SDB3-FC - Price: $2.97 - none in
Basket
- 22 in stock
|
|
Mini Ratcheting Bar Clamps, 7 1/2 inches overall in length. The jaws open about 4 inches. These are a little stiff new, but loosen up pretty quickly.
|
|
|
|
| |
Average Customer Rating: 
|
|
|
8 LED Metal Flashlight - Pewter Color
Item: SFB5-09TP1 - Price: $5.97 - none in
Basket
- 18 in stock
|
|
Includes a carrying case. 8 LEDs provide an Ultra bright white beam with extremely long battery life. The rubber covered switch is on the end. The barrel ends have o-rings to for water resistance, not for use under water. Light is 3 7/8 inches overall without the keychain. Uses 3 AAA Batteries, not included.
|
|
|
|
|
|
|
33pc Tamper Proof Screwdriver Bit Set, Premium
Item: SAB3-56173 - Price: $9.97 - none in
Basket
- 68 in stock
|
|
This is a really cool set. Premium 33pc 1/4 inch hex drive tamper proof security bit set with holder. Holder has a top, which is not shown in the picture. Additionally, the set includes the following: A magnetic bit holder Tamper Resistant Hex shapes; 5/64 inch, 3/32 inch, 7/64 inch, 1/8 inch, 9/64 inch, and 5/32 inch; Tamper Resistant Hex shapes; 2mm, 2.5mm, 3mm, 4mm, 5mm, and 6mm; Tamper Resistant star shapes; t8, t10, t15, t20, t25, t27, t30, t35, and t40; Tri-wing bits; #1, #2, #3, and #4; Spanner bits; #4, #6, #8, and #10; Torq bits; #6, #8, and #10. Each of these screwdrivers is worth its weight in gold if you need to open something put together by its respective fasteners. Note: These are intended for use with a regular hex drive screwdriver handle.
|
|
|
|
|
|
|
SPECIAL - 6pc Plastic Polish Restoration Kit, with Flitz
Item: XUP5-PPKIT - Price: $15.97 - none in
Basket
- 27 in stock
|
Regularly $19.97 - 6pc Plastic Polish Restoration Kit, featuring Flitz products. Use on headlights and other plastic surfaces. Set includes:
- One Flitz BP-03511 1.76 oz / 50g Metal Polish
- Two Flitz 1500 grit Abrasive Pads
- One XQC1-300B - 2.5 X 3 inch CONE Cloth Polishing Buff, 1/4 inch shank
- One XPA1-200B - 4 inch MUSHROOM Cloth Polishing Buff, 1/4 inch shank
- One 16 inch x 16 inch Ultra-Soft Micro Fiber Polishing Cloth.
Directions: Mask off the area with tape. Use the 1500 grit abrasive pad to polish up surface. Chuck cloth polishing buffs in a drill. Apply Flitz and buff the plastic with the cloth polishing buffs. Use the Microfiber cloth to final polish and clean up remaining polish.
Note: if the plastic is pitted, a more aggressive approach may be needed. While it is not included, we recommend using 500 grit sandpaper, followed by 800 grit sandpaper, followed by 1500 grit sandpaper, followed by 3000 grit sandpaper as preparation for this kit.
|
|
|
|
|
We try to keep photos and descriptions current. Slight differences in packaging, color, design, or size occasionally occur due to manufacturer changes. Images are not actual size. All measurements are approximate.
|
Hobby Tool
|
| |
|
|
|
|
|
|
Business Hours: 9:00am to 4:30pm PST, Monday through Friday
Telephone: (541) 926-1003
Fax: (541) 926-1350
|
|
|
|
|
|
Bulk means the item is not in retail packaging, but loose or in a plastic bag.
Unless stated otherwise, products are purchased individually and may be bulk packaged.
We reserve the right to limit sales quantities or cancel
orders.
Copyright © 1994-2009, Widget Supply
Dremel is a registered trademark of the Robert Bosch Tool Corporation.
|
|
