|
|
18mm 10x - 12mm 20x Jeweler's Loupe
Item: SFE2-8212 - Price: $5.97 - none in
Basket
- 85 in stock
|
|
Single Lens Element 10x 18mm - 20x 12mm Chrome Jewelers Loupe. No Case. Glass Lenses. May vary from picture. May be mismarked as a Triplet and 5 element.
|
|
|
|
|
|
|
20pc 1 1/4 inch Round Aluminum Jar Set
Item: SDE4-20box - Price: $4.97 - none in
Basket
- 64 in stock
|
|
20pc 1 1/4 inch (30mm) Round Aluminum Jar Set in an aluminum hinged storage box that is about 5-3/16 x 6-1/2 x 7/8 inches. Individual containers have an outside height of about 3/4 inch and a clear push on lid.
|
|
|
|
|
|
|
21mm 30x Chrome Teardrop Jewelers Loupe
Item: SDA3-1830C - Price: $5.97 - none in
Basket
- 37 in stock
|
|
Single Lens Element 21mm Jewelers Loupe, approximately 30x. Chrome Teardrop. No Case. Loupe has a bail to which a chain can be attached. This Loupe has one lens element.
|
|
|
|
|
|
|
6 inch Stainless Steel Digital Caliper; 0.0005 inch, 0.01mm Increments
Item: SFB3-004 - Price: $19.97 - none in
Basket
- 74 in stock
|
|
6 inch Stainless Steel Digital Caliper. Increments are .0005 inches/0.01mm Measures either metric or SAE in the same easy to read digital caliper. It measures inside, outside, and depth dimensions. May vary from picture.
|
|
|
|
| |
Average Customer Rating: 
|
|
|
Watch Band Spring Bar Tool
Item: BCZ03 - Price: $3.97 - none in
Basket
- 97 in stock
|
|
This tool is for attaching watch bands. The tips are delicate must be used with care. They are not warranted, but are replaceable. The handle has a ruler in inches on one side and metric on the other side. A quantity of 1 is for 1 tool. The two tools in the photo are to show each side of the tool.
|
|
|
|
| |
Average Customer Rating:
|
|
|
Watch Band Link Remover and 5 extra pins
Item: SAC4-6305 - Price: $4.97 - none in
Basket
- 727 in stock
|
|
Plastic Body Watch Band Link Removal Tool, with 5 replacement pins. End of pin is about 0.034 inches in diameter. The tool can accept watch bands up to 7/8 inch wide. The pins are delicate must be used with care. For best results, make sure the pin is aligned with the hole for the link pin, it is a smaller diameter than the hole and that the pins are not the screw in type. We are unable to get additional pins for this item. May vary from picture.
|
|
|
|
| |
Average Customer Rating:
|
|
|
Jeweler's Disc Cutter, 7 Sizes, 1/4 to 5/8 inch
Item: BCU30 - Price: $29.97 - none in
Basket
- 1 in stock
|
|
This handy tool allows you to put sheet materials into the horizontal slot and punch out a disc and hole with a hammer. The hole sizes are 1/4 inch, 5/16 inch, 3/8 inch, 7/16 inch, 1/2 inch, 9/16 inch, and 5/8 inch. Cuts metal up to 14 gauge.
|
|
|
|
|
Jeweler Tool
