|
|
4 1/2 inch Diamond Cutting Disk Set, 3pc
Item: SGR2-TJ7533 - Price: $4.97 - none in
Basket
- 11 in stock
|
|
3pc 4 1/2 inch Diamond Cutting Disk Set. Set includes two dry and one wet cutting disks. Ideal for general cutting of tile, concrete, etc. Max RPM 13200
|
|
|
|
|
|
|
MilesCraft 1405 Crown45 - Crown Molding Jig for Miter Saws
Item: SHJ4-1405 - Price: $29.97 - none in
Basket
- 2 in stock
|
|
MilesCraft 1405 Crown Molding Jig for Miter Saws. This jig eliminates the Upside Down and Backwards issue from crown molding projects. Intuitive Cut It The Way You See It orientation supports the crown molding on your miter saw fence the same way it will be seen and installed on the wall. No more thinking Upside Down and Backwards means fewer wrong cuts and less scrap molding. Adjustable angle setting - Set to work with common molding spring angles (38 degree, 45 degree, & 52 degree). Angle Finders included - Easily determine the spring angle of your molding. Wide indented cutting surface. Supports all crown moldings between 2 inch and 5.5 inch. Accommodates special dentil style detailed moldings. Collapsible design - For compact storage. Cut finished molding with no break out on the finished surface. Saw blade enters the material from the front due to its unique orientation.
|
|
|
|
|
|
|
MilesCraft 1406 FeatherBoard, for router tables and table saws
Item: XUQ3-1406 - Price: $14.97 - none in
Basket
- 4 in stock
|
|
MilesCraft 1406 FeatherBoard. Use with router tables and table saws. The only Feather Board that comes with all hardware necessary for any router table or table saw. 5/8 inch & 3/4 inch metal miter bars. Unique split rail construction provides maximum hold. 2 sizes fit standard miter slots. Two 1/4 inch T-Track Bolts Included. Dual Slide Motion for quick and easy set up. Unique pre-load tension design for consistent tension. S style knobs prevent over tightening and provides non-slip removal. High visibility yellow - Easily located in a busy shop
|
|
|
|
|
|
|
MilesCraft 1407 Dual / Tandem FeatherBoard
Item: SHB7-1407 - Price: $29.97 - none in
Basket
- 1 in stock
|
|
MilesCraft 1407 Dual / Tandem FeatherBoard. Comes with all hardware necessary for dual or tandem use on any router table, table saw, or band saw. Two 5/8 inch & Two 3/4 inch metal miter bars. Unique split rail construction provides maximum hold. 2 sizes fit standard miter slots. Four 1/4 inch T-Track Bolts Included. Sturdy full size spacer perfect for tall stock operations. Dual Slide Motion for quick and easy set up. Unique pre-load tension design for consistent tension. S style knobs prevent over tightening and provides non-slip removal. High visibility yellow - Easily located in a busy shop.
|
|
|
|
|
|
|
MilesCraft 3401 BladeChanger
Item: SHH4-3401 - Price: $11.97 - none in
Basket
- 3 in stock
|
|
MilesCraft 3401 BladeChanger. Avoid damaging expensive saw blades when installing or removing them. Universal step design fits all 10 inch (250 mm), 8 inch dado (200 mm), and 7.25 inch (184 mm) saw blades. Open design allows you to view your blade while changing. Large handle provides a firm grip and keeps knuckles away from the wrench. Hang holes/High visibility yellow - Easily stored and located in a busy shop.
|
|
|
|
|
|
|
MilesCraft 3402 PushStick, Depth Gauge, and Docking Station
Item: XWY4-3402 - Price: $15.97 - none in
Basket
- 4 in stock
|
|
MilesCraft 3402 PushStick, Depth Gauge, and Docking Station. Push stick and depth gauge with magnetic docking station to keep important table top accessories close at hand. Sturdy solid push stick for guiding material through table saws and router tables. Tall tilted handle keeps hands away from cutting blade or bit. Rear foot grabs material. Soft surface base provides control without damaging the stock. Includes a depth gauge. Measure, mark, and locate blade and bit heights and table offsets. Reversible scale - Imperial or Metric. Includes a docking station. Keep push stick, depth gauge, and marking pencils close at hand. Magnetic base helps hold docking station in place. High visibility yellow - Easily located in a busy shop.
|
|
|
|
|
