|

|
Dremel 16413 - 5pc Pin End Scroll Saw Blades
Item: BBB32 - Price: $3.59 - none in
Basket
- 3 in stock
|
|
5 inches long. 18.5 teeth per inch, 7 teeth per centimeter. Easiest to take in and out of saw. For tight radius cutting in hard and soft wood. Packaging may vary.
|
|
|
|
|
|

|
Dremel 16431 - 12pc Reverse Tooth Scroll Saw Blades
Item: BBB33 - Price: $5.79 - none in
Basket
- 3 in stock
|
|
5 inches long. 20 teeth per inch, 8 teeth per centimeter. Provides a smooth, splinter-free finish. Leaves a clean, sharp edge on both the top and bottom of your wood piece. Packaging may vary.
|
|
|
|
|
|

|
Dremel 16432 - 12pc Reverse Tooth Scroll Saw Blades
Item: BBB40 - Price: $5.79 - none in
Basket
- 4 in stock
|
|
5 inches long. 12.5 teeth per inch, 5 teeth per centimeter. Provides a smooth, splinter-free finish. Leaves a clean, sharp edge on both the top and bottom of your wood piece. Packaging may vary.
|
|
|
|
|
|

|
Dremel 16438 Quick Change Adapter Kit
Item: XRM5-16438 - Price: $3.97 - none in
Basket
- 31 in stock
|
|
Dremel 16438 Quick Change Adapter Kit. This kit is for use with Dremel 16 inch Scroll saws models 1671 and 1695. The kit contains the upper blade holder, T-handle wrench, mounting hardware, and instructions. This set does not include the lower blade holder for holding unpinned blades and came from the factory without it. We have included a second upper blade holder which you may be able to modify for use on the lower side. Regular Wholesale is $11.00 for these.
|
|
|
|
|
|

|
Dremel 9/64 inch T-Handle Hex Wrench
Item: XRK4-THEX - Price: $1.29 - none in
Basket
- 77 in stock
|
|
Dremel 9/64 inch T-Handle Hex Wrench. These came from Dremel Scroll Saw Adapter Kits and were intended for use when changing blades on Dremel Scroll Saws, but could be used for any 9/64 hex drive screw.
|
|
|
|
|