|
|
Watch Band / Bracelet Holder, Plastic
Item: XUL3-6418 - Price: $2.97 - none in
Basket
- 229 in stock
|
|
Holder has different slots for different sized bands/bracelets. Allows you to more easily remove and insert pins and screws. Make your life easier with this great tool. Holder has holes in the bottom so it can be mounted to your bench or worksurface. Measures about 2 inches square by 1 inch tall.
|
|
|
|
|
|
|
Watch Band Spring Bar Tool
Item: BCZ03 - Price: $3.97 - none in
Basket
- 88 in stock
|
|
This tool is for attaching watch bands. The tips are delicate must be used with care. They are not warranted, but are replaceable. The handle has a ruler in inches on one side and metric on the other side. A quantity of 1 is for 1 tool. The two tools in the photo are to show each side of the tool.
|
|
|
|
|
|
|
Replacement Pointed End for BCZ03
Item: D-CB01 - Price: $1.49 - none in
Basket
- 71 in stock
|
|
Replacement Pointed End for BCZ03 Watch Band Spring Bar Tool. They simply screw out of the handle.
|
|
|
|
|
|
|
Replacement Forked End for BCZ03
Item: D-CB02 - Price: $1.49 - none in
Basket
- 150 in stock
|
|
Replacement Forked End for BCZ03 Watch Band Spring Bar Tool. They simply screw out of the handle.
|
|
|
|
|
|
|
Double Sided Watch Spring Bar Tool
Item: BDL05 - Price: $3.97 - none in
Basket
- 24 in stock
|
|
Used for removing and attaching bands that are held on with spring bars. There is a very small forked tip and a regular sized tip. We cannot get replacement tips for these.
|
|
|
|
|
|
|
Plastic Watch Band Link Remover, 5 extra pins
Item: SAC4-6305 - Price: $4.97 - none in
Basket
- 342 in stock
|
|
Plastic Body Watch Band Link Removal Tool, with 5 replacement pins. End of pin is about 0.034 inches in diameter. The tool can accept watch bands up to 7/8 inch wide. The pins are delicate must be used with care. For best results, make sure the pin is aligned with the hole for the link pin, it is a smaller diameter than the hole and that the pins are not the screw in type. We are unable to get additional pins for this item. May vary from picture. Previously SHJ4-6305
|
|
|
|
|
|
|
Red Metal Body Watch Band Link Removal Tool
Item: SAC2-CLR - Price: $5.97 - none in
Basket
- 53 in stock
|
|
Works for watch Bands between 0 and 15mm wide. If you trim the pin, you could use them for watches up to about 21mm in width. Pin is about 0.038 inch in diameter. The pins are delicate must be used with care. The pins have no warranty, but are replaceable. For best results, make sure the pin is aligned with the hole for the link pin, it is a smaller diameter than the hole and that the pins are not the screw in type.
|
|
|
|
|
|
|
4pc SAC2-CLR Replacement Bar, 26mm
Item: D-AD14 - Price: $2.97 - none in
Basket
- 27 in stock
|
|
Four piece replacement Bar for SAC2-CLR Watch Band Link Removal Tool. Pin is about 0.038 inch in diameter.
|
|
|
|
|
|
|
4pc SAC2-CLR Replacement Pins, 23mm and 31mm
Item: BDM92 - Price: $2.97 - none in
Basket
- 856 in stock
|
|
4pc Replacement Pins for SAC2-CLR Metal Body Watch Band Link Removal Tool(Not Included). Includes two 23mm and two 31mm pins. Some of these are cut a little rough and may have a burr that needs cleaning up. Pin is about 0.038 inch in diameter.
|
|
|
|
|
|
|
5 1/4 inch Watch Band Hole Punch Pliers
Item: BEX27 - Price: $5.97 - none in
Basket
- 23 in stock
|
|
Punches a 5/64 inch / 1.75mm hole in leather watch bands. Lap joint, double spring style with rubber grips. 5 1/2 inches long overall.
|
|
|
|
|
|
|
4 in 1 Watch Tool Kit
Item: BEH58 - Price: $3.97 - none in
Basket
- 7 in stock
|
|
2mm flat, 3mm flat, 3mm phillips, 1.05mm pin tips. Store tips inside metal handle. Handle is about 3 1/2 inches long without tips. End of handle swivels.
|
|
|
|
|
|
|
Watch Maker's Hammer, 1.4 ounce
Item: XSU5-8370 - Price: $2.97 - none in
Basket
- 239 in stock
|
|
Light hammer for delicate operations. The whole hammer weighs about 1.4 ounces.
|
|
|
|
|
