Products
Filters
- 80 Grit (1)
- 150 grit (2)
- 3/32 inch shank (18)
- 1/8 inch shank (70)
- Aluminum Oxide (41)
- Dremel Diamond Burrs - Cone (1)
- Dremel Diamond Burrs - Cone-Inverted (1)
- Dremel Flame Grinding Stone (2)
- Dremel Grinding Stone - Cone (14)
- Dremel Grinding Stone - Cone - Inverted (7)
- Dremel Grinding Stone - Cylinder (28)
- Dremel Grinding Stone - Sets (12)
- Dremel Grinding Stone - Wheel (30)
- Dremel Mandrel - Screw (1)
- Dremel Mandrels (1)
- Dremel Polishing - Buffing Wheels (1)
- Dremel Polishing - Rubber-Knife (4)
- Dremel Polishing - Rubber-Wheels (7)
- Dremel Sanding Bands - 1/4 inch (2)
- Dremel Steel Burrs - Cone (1)
- Dremel Steel Burrs - Cup (1)
- Silicon Carbide (40)
- Beadalon (3)
- Beadsmith (5)
- Benzomatic (1)
- Black and Decker (7)
- Bosch (14)
- Compare to Dremel (14)
- Craftsman (1)
- Credo (1)
- Dafa (1)
- Darice (9)
- DIXRIP (4)
- Donegan Optical (1)
- Dremel (223)
- Elmers (3)
- Eurotool (81)
- Excel (123)
- Eze-Lap (3)
- Fiskars (90)
- Fox (166)
- Gingher (15)
- Hatho (3)
- HAWK (38)
- Hawk (1)
- Hitachi (1)
- Irwin (4)
- JSP (19)
- Keystone (2)
- Mastercraft (1)
- Miracle Cloth (1)
- Miracle Point (1)
- Myco (72)
- N/A (8)
- Nelson (5)
- North American Rotary (28)
- Optivisor (1)
- PRIMO (12)
- PTC (63)
- Robinson (3)
- ROBINSON (1)
- Rotozip (3)
- SE (383)
- Shelby Co (1)
- Simco (2)
- Siya (213)
- SIYA (5)
- Slip n Snip (1)
- Swiss Acura (2)
- Szco (6)
- Uncle Bills (1)
- United Cutlery (2)
- vendor-unknown (102)
- Walnut Hollow (12)
- WS (246)
- ws (1)
- X-ACTO (60)
- XURON (2)
01.6mm - 1/16 inch Screw Mandrel - 1/8 inch shank - Germany
1/16 inch Small Head Screw Mandrel Use with wheels which have 1/16 inch center hole Head is about 3/16 inch diameter Arbor is about 1 1/2 inches l...
View full details01.7mm HSS Cup Cutter - Switzerland - 3/32 inch shank
1.7mm Cup Cutter High Speed Steel 1.7mm diameter cup 3/32 inch shank For use with Dremel and other rotary tools High speed steel Cup burs have cut...
View full details02.4 x 11.4mm 150 Grit Cone Diamond Burr - 1/8 inch shank
3/32 inch 150 Grit Cone Diamond Coated Burr 3/32 x 7/16 inch (2.4 x 11.4mm) cone shaped head 1/8 inch shank Diamond coated accessories will cut in...
View full details02.4mm - 3/32 inch Swiss Acura Inverted Cone Diamond Burr - 3/32 inch shank
Inverted Cone Diamond Burr 3/32 inch in diameter x 3/32 inch long diamond coated inverted cone 3/32 inch shank Manufactured by Swiss Acura Diamond...
View full details02.4mm - 3/32 x 1/8 inch Cone HSS Cutter - 3/32 inch shank
3/32 inch Cone Cutter High Speed Steel 3/32 inch diameter by 1/8 inch long cone shaped cutter 3/32 inch shank High speed steel For use with Dremel...
View full details03.2mm - 1/8 x 7/64 Inverted Cone Grinding Stones - 2pc - 1/8 inch shank
1/8 inch Inverted Cone Grinding Stones Sold in quantities of 2 1/8 inch diameter x 7/64 inch wide 1/8 inch shank For use in Dremel and other rotar...
View full details03.6mm - 9/64 inch Cone Grinding Stone - 1/8 inch shank - USA
Brown Cone Grinding Stone 3.6mm x 6.4mm - 9/64 inch diameter x 1/4 inch wide Cone Grinding Stone 1 3/4 inches long overall 1/8 inch shank For use ...
View full details03.9mm - 5/32 x 1/4 inch Cylinder Grinding Stone - 1/8 inch shank
5/32 inch Cylinder Aluminum Oxide Grinding Stone 5/32 inch diameter x 1/4 inch long cylinder 1 3/4 inches overall 1/8 inch shank For use in Dremel...
View full details04.0mm - 5/32 inch Cone Grinding Stones - 3/32 shank - 5pc
5pc 5/32 inch Cone Grinding Stones 5 piece 5/32 inch diameter x 3/8 inch long cone 3/32 inch shank For use with Dremel and other rotary tools Sili...
View full details04.0mm - 5/32 x 3/16 Cone Grinding Stones - 2pc - 1/8 inch shank - USA
5/32 inch Brown Cone Grinding Stones Sold in quantities of 2 5/32 inch diameter x 3/16 inch wide 1/8 inch shank For use in Dremel and other rotary...
View full details04.0mm - 5/32 x 3/8 inch Cylinder Grinding Stone - 1/8 inch shank - 5pc
5pc 5/32 Inch Cylinder Grinding Stones 5 piece set 5/32 inch in diameter x 3/8 inch long cylinder 1/8 inch shank For use in Dremel and other rotar...
View full details04.0mm - 5/32 x 7/16 inch Grey Cone Grinding Stones - 1/8 inch shank - USA
Grey Cone Grinding Stones 5/32 inch in diameter x 7/16 inch wide 1/8 inch shank For use in Dremel and other rotary tools Silicon carbide Use on no...
View full details04.4mm - 11/64 x 3/32 inch Cone Grinding Stones - 2pc - 1/8 inch shank
11/64 inch Cone Grinding Stones - 2pc Sold in quantities of 2 11/64 inch diameter x 3/32 inch wide 1/8 inch shank For use in Dremel and other rota...
View full details04.8mm - 3/16 inch Cylinder Grinding Stones - 2pc - USA - 1/8 shank
3/16 inch Brown Cylinder Grinding Stones Sold in quantities of 2 3/16 inch diameter x 13/32 inch long cylinder 1 1/2 inches long overall 1/8 inch ...
View full details04.8mm - 3/16 inch Green Cone Grinding Stones - USA - 1/8 inch shank
3/16 inch Green Flat End Cone Grinding Stones 3/16 inch diameter flat end cone 1 3/16 inches long overall 1/8 inch shank For use in Dremel and oth...
View full details04.8mm - 3/16 x 1/4 inch Cylinder Grinding Stone - 1/8 inch shank
3/16 inch Green Cylinder Grinding Stone 3/16 inch diameter x 1/4 inch long cylinder 1/8 inch shank For use in Dremel and other rotary tools Green...
View full details04.8mm - 3/16 x 1/4 inch Cylinder Grinding Stones - 2pc - 1/8 inch shank
3/16 inch Cylinder Grinding Stones - 2pc Sold in quantities of 2 3/16 inch diameter x 1/4 inch long cylinder 1/8 inch shank For use in Dremel and ...
View full details04.8mm - 3/16 x 3/16 inch Cone Grinding Stones - 2pc - 1/8 inch shank
3/16 inch Cone Grinding Stones Sold in quantities of 2 3/16 inch diameter x 3/16 inch long 1/8 inch shank For use in Dremel and other rotary tools...
View full details04.8mm - 3/16 x 7/16 inch Cone Grinding Stones - 2pc - 1/8 inch shank
3/16 inch Cone Grinding Stones Sold in quantities of 2 3/16 inch diameter x 7/16 inch long cone 1 7/8 inches long overall 1/8 inch shank For use i...
View full details05.2mm - 13/64 inch Green Cone Grinding Stones - 1/8 inch shank - USA
13/64 inch Green Flat End Cone Grinding Stones 13/64 inch diameter flat end cone 1 1/2 inches long overall 1/8 inch shank For use in Dremel and ot...
View full details05.2mm - 13/64 inch Round Cone Grinding Stones - USA - 1/8 inch shank
13/64 inch Green Round End Cone Grinding Stones 13/64 inch diameter round end cone 1 1/2 inches long overall 1/8 inch shank For use in Dremel and ...
View full details05.6mm - 7/32 x 3/8 inch Cylinder Grinding Stone - 1/8 inch shank
7/32 inch Cylinder Grinding Stone 7/32 inch diameter x 3/8 inch long cylinder 1/8 inch shank For use in Dremel and other rotary tools Brown Alumin...
View full details05.6mm - 7/32 x 9/16 inch Pink Cylinder Grinding Stone - 1/8 inch shank
7/32 inch Cylinder Grinding Stone 7/32 inch diameter x 9/16 inch long cylinder 1/8 inch shank For use in Dremel and other rotary tools Pink alumin...
View full details06 x 13.75mm Cylinder Grinding Stones - 2pc - 1/8 inch shank
6mm Cylinder Grinding Stones - 2pc Sold in quantities of 2 6mm diameter x 13.75mm long cylinder 1/8 inch shank For use in Dremel and other rotary ...
View full details